IT
EnglishEN FrançaisFR EspañolES DeutschDE Português (Brasil)PT ItalianoIT PolskiPL TürkçeTR
BIOS Config
BIOS Protocol

BIOS Config

BIOS Required

Enter your BIOS

All settings below must be applied from your UEFI/BIOS. Restart your PC and press the BIOS key (usually DEL or F2) during boot.

Step // 01

1. Enable Trusted Computing Module

Enable TPM so Vanguard and Windows 11 features work correctly.

  • Go to Advanced > Trusted Computing.
  • Set Security Device Support to Enable.
  • AMD: set TPM Device Selection to Firmware TPM.
    Intel: set it to PTT.
  • Go to Settings > Security > Trusted Computing.
  • Set Security Device Support to Enabled.
  • AMD: set AMD fTPM switch to AMD CPU fTPM.
    Intel: set TPM Device Selection to PTT.
  • Go to Settings > Miscellaneous > Trusted Computing.
  • Set Security Device Support to Enable.
  • AMD: set TPM Device to Firmware TPM.
    Intel: PTT is enabled automatically.
  • Go to Advanced > Trusted Computing.
  • Set Security Device Support to Enable.
  • AMD: set AMD fTPM switch to AMD CPU fTPM.
    Intel: set to Intel Platform Trust Technology.
Step // 02

2. Enable Virtualization

Required by Vanguard. Do not disable it after the serial change.

  • Go to Advanced > CPU Configuration.
  • Intel: set Intel Virtualization Technology to Enabled.
  • AMD: set SVM Mode to Enabled.
  • Go to OC > CPU Features (or Advanced > CPU Configuration).
  • Intel: set Intel Virtualization Tech to Enabled.
  • AMD: set SVM Mode to Enabled.
  • Go to Tweaker > Advanced CPU Settings (or Settings > Miscellaneous).
  • Intel: set Intel Virtualization Technology to Enabled.
  • AMD: set SVM Mode to Enabled.
  • Go to Advanced > CPU Configuration.
  • Intel: set Intel Virtualization Technology to Enabled.
  • AMD: set SVM Mode to Enabled.
Vanguard requires virtualization. Do not disable it after the serial change.
Step // 03

3. Enable Secure Boot & Reset Keys

When you enable Secure Boot, reset / clear the Secure Boot keys at the same time. This is critical.
  • Go to Boot > Secure Boot.
  • Set OS Type to Windows UEFI mode.
  • Go to Key Management > Clear Secure Boot keys.
  • Go to Boot > CSM > set Launch CSM to Disabled.
  • Go to Settings > Security > Secure Boot.
  • Set Secure Boot to Enabled.
  • Go to Key Management > Delete All Secure Boot Variables (or Clear Secure Boot Keys).
  • Go to Settings > Advanced > Windows OS Configuration > set BIOS CSM/UEFI Mode to UEFI.
  • Go to Boot > Secure Boot.
  • Set Secure Boot Enable to Enabled.
  • Go to Key Management > Clear All Secure Boot Keys.
  • Go to Boot > set CSM Support to Disabled.
  • Go to Security > Secure Boot.
  • Set Secure Boot to Enabled.
  • Go to Key Management > Clear Secure Boot Keys (or Delete all variables).
  • Go to Boot > set CSM to Disabled.
Save

Save & exit BIOS

Press F10 and confirm Save and Exit.